: +91- 93753 95291

Universal Tensile Machine

STANDARDS::

ASTM D 638,D 882, D 790, D 695, ISO R527, BS 2782 and other equivalent standards, Load Measuring System as per ASTM E4, ISO 7501. Strain Measuring System require as per ASTM E83.

Product :

Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking.

Application :

Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine.

USP :

  • The "Surya" has some unique models developed with versatility in mind. Surya UTM's can be used with our without using P.C.
  • Universal Software capable of performing test on any type of materials.
  • Test on high & low loads with different cross head travel speed can be performed
  • The "Surya" tensile offers testing flexibility and ease of use via an intelligent electromechanical system data transfer. ratio of load cell to instrument is 24 bits to give instateneous readout of data during process. The Surya versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape materials can be prespecified on specification window for direct calculation of area.

Spacification :

MODEL NO.

SDSUTM-I

SCSUTM-I

SKDTUTM-I

SCTUTM-I

SDUTMPPS-I

SCUTMPPS-I

SDTLT-I

SCTLT-I

MODEL NAME

Digital Single Screw
UTM

Computerised Single
Screw UTM

Digital Twin Screw
UTM

Computerised Twin
Screw
UTM

Digital
UTM With Power
Pack
System

Computerised UTM With
Power
Pack
System

Digital Top Load Tester

Computerised Top Load
Tester

CAPACITY

UP TO
0-1000 kgs.

UP TO
0-1000 Kgs.

UP TO
0-7500 KGS

UP TO
0-7500 KGS

UP TO
7500 KGS -50000 KGS (7.5 TON -50 TON)

UP TO
7500 KGS -50000 KGS (7.5 TON
-50 TON)

UP TO 0-150KG

UP TO
0-150 KGS.

 

THE UTM CAN BE DESIGNED & SUPPLIED ACCORDING TO INDIVIDUAL LOAD RQUIREMENT

 

EXTENSION

0-1000 MM OR AS PER REQUIREMENT

ATTACHMENT

Compression/flExural/COF/ICOF/Peel/Bond/Tear/Shear/Puncture/Burst can be provided in all above models as per individual requirement

LOAD INPUT

Maximum 2 Load Cell facility can be provided

SPEED

1 TO 500 MM / MIN (AS PER STANDARD REQUIREMENT)

RESOLUTION
OF LOAD

00000 KG/000.00/0000.01 OR 0000KG / 000.0 KG / 00.00 KG

EXTENSION
RESOLUTION

000.0 MM /000.00MM

EXTENSIO METER

Contact Type as per requirment

A.C. DRIVE
MOTOR HP

Suitable for UTM Capacity

POWER SUPPLY

230 V AC, 50 HZ, SINGLE PHASE

440 V AC, 50 HZ, THREE PHASE

PAINT

POWDER COATING & HARD CHROME PLATING

MODEL

FLOOR STATNDING / TABLE TOP (AS PER CAPACITY OF MACHINE)

PRECAUTION/
SAFETY FEATURES

ELECTRICAL EMERGENCY SWITCH, ELECTRO MECHANICAL LIMIT SWITCH, ELCTRONIC THROUGH MICRO CONTROLLER PARAMETERS

SOFT WARE
FACILITY

RS 232 interface with WINDOW based software to conduct test and keep record of data with graph for the test calculated results of Yeild Load,Yeild Extension, Break Load, Break Extension, and Modulus of Elasticity, Maximum Load, Maximum extension, and Tensile Strength.

 
  • On line update facility
  • Colour combination will be changeable
  • Line,bar chart,Doted line, etc facility in graph.
  • Graph Grids colour Combination Facility.
  • Graph Zooming Facility.
  • Individual Graph facility for Tensile, COF, ICOF, Compression & Flexural
  • Individual Posen Zooming Facility.
  • Individual graph Comparison facility.
  • Result Convert Facality in Graph & Excell Formate
  • Graph Overlapping Facility for analysis Material Property.
  • With in Second we get the Result in K.G./cm2 And Nt. mm2.
  • Auto Scaling and fix scaling Facility.
  • Comport Auto Selectable.
  • Company logo inserting facility.
  • USB Driver Facility For Safety Features.
  • Two way Communication Facility.
  • We will generate the report with your company logo.

 

Related Products

Melt Flow Indexer