Product Details Universal Tensile Machine

Product :

Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking

Application :

Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine.

USP :

The "Surya has some unique models developed with versatility in mind. Surya UTM's can be used with our without using P.C.
Universal Software capable of performing test on any type of materials.
Test on high & low loads with different cross head travel speed can be performed
The "Surya" tensile offers testing flexibility and ease of use via an intelligent electromechanical system data transfer. ratio of load cell to instrument is 24 bits to give instateneous readout of data during process. The Surya versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape materials can be prespecified on specification window for direct calculation of area.

Spacification :

MODEL NO.	SUTM-I	SUTM-I	SUTM-I	SUTM-I	SUTMPPS-I	SUTMPPS-I	SDTLT-I	STLT-I
MODEL NAME	Digital Single Screw UTM	Computerised Single Screw UTM	Digital Twin Screw UTM	Computerised Twin Screw UTM	Digital UTM With Power Pack System	Computerised UTM With Power Pack System	Digital Top Load Tester	Computerised Top Load Tester
CAPACITY	UP TO 0-1000 kgs.	UP TO 0-1000 Kgs.	UP TO 0-7500 KGS	UP TO 0-7500 KGS	UP TO 7500 KGS -50000 KGS (7.5 TON -50 TON)	UP TO 7500 KGS -50000 KGS (7.5 TON -50 TON)	UP TO 0-150KG	UP TO 0-150 KGS.
	THE UTM CAN BE DESIGNED & SUPPLIED ACCORDING TO INDIVIDUAL LOAD RQUIREMENT
EXTENSION	0-1000 MM OR AS PER REQUIREMENT
ATTACHMENT	Compression/flExural/COF/ICOF/Peel/Bond/Tear/Shear/Puncture/Burst can be provided in all above models as per individual requirement
LOAD INPUT	Maximum 2 Load Cell facility can be provided
SPEED	1 TO 500 MM / MIN (AS PER STANDARD REQUIREMENT)
RESOLUTION OF LOAD	00000 KG/000.00/0000.01 OR 0000KG / 000.0 KG / 00.00 KG
EXTENSION RESOLUTION	000.0 MM /000.00MM
EXTENSIO METER	Contact Type as per requirment
A.C. DRIVE MOTOR HP	Suitable for UTM Capacity
POWER SUPPLY	230 V AC, 50 HZ, SINGLE PHASE				440 V AC, 50 HZ, THREE PHASE
PAINT	POWDER COATING & HARD CHROME PLATING
MODEL	FLOOR STATNDING / TABLE TOP (AS PER CAPACITY OF MACHINE)
PRECAUTION/ SAFETY FEATURES	ELECTRICAL EMERGENCY SWITCH, ELECTRO MECHANICAL LIMIT SWITCH, ELCTRONIC THROUGH MICRO CONTROLLER PARAMETERS
SOFT WARE FACILITY	RS 232 interface with WINDOW based software to conduct test and keep record of data with graph for the test calculated results of Yeild Load,Yeild Extension, Break Load, Break Extension, and Modulus of Elasticity, Maximum Load, Maximum extension, and Tensile Strength.
	On line update facility Colour combination will be changeable Line,bar chart,Doted line, etc facility in graph. Graph Grids colour Combination Facility. Graph Zooming Facility. Individual Graph facility for Tensile, COF, ICOF, Compression & Flexural Individual Posen Zooming Facility. Individual graph Comparison facility. Result Convert Facality in Graph & Excell Formate Graph Overlapping Facility for analysis Material Property. With in Second we get the Result in K.G./cm2 And Nt. mm2. Auto Scaling and fix scaling Facility. Comport Auto Selectable. Company logo inserting facility. USB Driver Facility For Safety Features. Two way Communication Facility. We will generate the report with your company logo.